The phrase "achieve a high resolution" is correct and usable in written English.
It can be used in contexts related to imaging, printing, or any situation where clarity and detail are important.
Example: "To ensure the best quality for the presentation, we need to achieve a high resolution in our graphics."
Alternatives: "attain a high resolution" or "obtain a high resolution."
This technique makes it possible to achieve a high resolution of the displacement field in the thickness direction without adding more degrees-of-freedom in this direction.
A HRTEM with Cs corrector can achieve a high resolution of less than 0.1 nm even if the acceleration voltage is 80 kV.
A staggered grid arrangement is used and coordinate transformation is applied to allow non-equidistant meshsize in all three dimensions in order to achieve a high resolution near the ground and near obstacles.
Instead of directly using a traditional XCT, we pursued to develop a different discrete tomography (DT) method, aiming to achieve a high resolution in time during the measurements with only limited projection data.
The distal end of the fibre containing the LPG has been coated with a silver mirror in order to track the shift of the resonance loss band in reflection and to achieve a high resolution.
The concept of coupling the FE-method to simulate the macroscopic behavior of the material and the spectral solver to achieve a high resolution of the microstructure in the framework of RVE computations leads to an efficient strategy regarding computational time and modeling of the microstructure.
Traditionally, inorganic scintillators are used and, in recent times, coupled to position sensitive PMTs to achieve a higher resolution.
This makes it possible to achieve a higher resolution in comparison to the most commonly used Al2O3-based ceramic pressure sensors and an appropriate miniaturisation.
MIMO radar can achieve a higher resolution than PA due to its long integration time.
Compared to previous reports of LQTs for cold ions coupled to a TOF mass spectrometer, we achieve a higher resolution at the cost of having to scan the post-ejection-acceleration delay over several experiments.
The printing resolution we observed, at ten drops per location, was about 350 microns, but we should be able to achieve a higher resolution by printing colonies from single droplets.
