The phrase "accordance with the method proposed" is correct and usable in written English.
It can be used when referring to following or adhering to a specific method that has been suggested or put forward.
Example: "The experiment was conducted in accordance with the method proposed by the researchers in their previous study."
Alternatives: "in line with the suggested method" or "consistent with the proposed approach".
The percentage error was calculated in accordance with the method proposed by Crichley and coworkers [ 33].
Protein concentration was determined in accordance with the method proposed by Lowry and coworkers [ 27].
Tumors were graded in accordance with the method proposed by Goldschmidt and colleagues [ 29].
GNPs with an average size of 47 nm were synthesized through chemical reduction in accordance with the method proposed by Kimling et al. [ 25].
Telomerase activity was measured using the TRAP method (TRAPEZE ® XL telomerase detection kit, Invitrogen, Manhattanville, NY), in accordance with the method proposed by Kim et al [ 25].
In this setting, the EFC is supposed to follow the procedure set up in accordance with the method proposed by Air France Consulting.
The method proposed in this paper is based on informed transformation [17], which is in accordance with the mapping approach in the scope of Model Driven Engineering [18].
The method proposed has several limitations.
At each step of the analysis, plastic conditions are checked at the critical (end) sections of the girders and columns, where a thermal mapping with reduced mechanical properties is evaluated in accordance with the 500 °C isotherm method proposed by Eurocode 2, while the behaviour of a HYDB is idealized through the use of a bilinear law provided that buckling is prevented.
The results show that the seismic performance of the 3- and 5-story model structures designed in accordance with the proposed method coincide well with the given design objectives.
The analysis results show that the maximum displacements of structures generally decrease as the stiffness of the brace increases, and that the maximum displacement of the model structures designed in accordance with the proposed method corresponds well with the given target displacement.
