With the base 4-cylinder engine (2.4 liters, 190 horsepower), the Accord attains 30 m.p.g. on the highway with room for four adults and their gear.
He walked away from Israel, even though a permanent, sustainable peace accord cannot be attained without Israel and the Palestinians agreeing.
Professor Mauriello achieved the highest scholastic average ever attained according to his Profile published in the Accounting Ledger, published in February, 1953, authored by Joseph Silvermintz.
According to the attained Woehler-like diagrams, a threshold load of 730 N exists for the film delamination by fatigue in the investigated case.
According to the attained results, both mineralizing agents (B4C and SiO2) induced the formation of Al18B4O33 or CA6 grains in the designed compositions.
Grilled Spanish mackerel sits in warm ponzu next to plums and "yolk jam" — a wonderfully pure, almost solid egg yolk, the texture attained, according to a server, by "cooking the yolk over low heat for a very long time".
According to the attained results, the alumina-based binders (HA or ColAlu) induced a more effective sintering process due to their high specific surface area, improving the physical properties and the binding level of the generated microstructure.
The injection amperometric investigation confirms the highest selectivity of 284 mA g−1 μM−1 is attained, according to a linear regression plot of current response versus glucose concentration, i.e., 0‒1 mM.
According to the attained results, hydratable alumina seems to be a suitable binder to improve the corrosion resistance of such castables, as it induces densification and the formation of an alumina-rich spinel phase at the slag matrix interface.
Starting from 14.8% of water (dry basis) as measured in the amorphous starch-water system, a minimum of 12.7 to 14.4% can be attained according to the type of plasticizer added.
According to the attained results, adding 1.5 wt% of the evaluated sintering additive to the designed castables led to a remarkable increase of the hot modulus of rupture (maximum of 40.4 MPa at 800 °C for the CAC-containing refractory) and high erosion resistance (1.5 2.9 cm3) after pre-firing at 800 °C for 5 h.
