Sentence examples for access control sublayer from inspiring English sources

Medium access control sublayer.

These standards define the network architecture, the physical layer and the medium access control sublayer for these systems.

The IEEE 802.11 distributed coordinating function is used as medium access control sublayer protocol for all nodes in the simulation.

The 802.11 medium access control (MAC) sublayer coordinates transmissions on the same channel using the Carrier Sense Multiple Access/Collision Avoidance (CSMA/CA) protocol.

The IEEE 802.11p uses the enhanced distributed channel access (EDCA) medium access control (MAC) sublayer protocol based on distributed coordination function (DCF) [4].

This increased use in mobile applications has naturally led to new challenges to the design of sensor protocols, especially in the media access control (MAC) sublayer.

The PHY works for but does not directly report to the ZigBee specification layers, which reside above the IEEE 802.15.4 media access control (MAC) sublayer.

The IEEE 802.15.4 standard has been designed to specify the physical layer (PHY) and medium access control (MAC) sublayer for low power consumption, short transmission range, and low-rate wireless personal area network (LR-WPAN) [1].

In this article, a physical layer and a medium access control (MAC) sublayer are presented for small cells to operate in the 5 GHz unlicensed national information infrastructure (UNII) band.

Although many recent works focus on cross-layer designs that combine AMC schemes with ARQ error control protocols (see, e.g.,[1 12]), proposals also incorporating the multiuser scheduling process at the media access control (MAC) sublayer are much less common (see, e.g.,[13 15]).

After the MPE-FEC frame is fully constructed, at the medium access control (MAC) sublayer, each IP packet in ADT and each column of RSDT are extracted for adding a MAC overhead, that is, 12B MPE/FEC header and 4B CRC-32 trailer (Figure 2).