Sentence examples for acceptance analytical from inspiring English sources

Based on the concept of gap acceptance, analytical models, in turn, can be developed starting from uncongested conditions; they require that the behavioral parameters are specified [8].

Their proposals were, moreover, given additional impetus by the widespread acceptance of analytical approaches in other branches of philosophy.

They can be characterized by only few parameters and have found wide acceptance for analytical studies and simulations.

Then, the types of ways in which products are accepted by society, as analytical acceptance (whereby products are accepted by users based on their experience of using those products) and synthetic acceptance (whereby products are accepted without being experienced), will be discussed.

Setting acceptance criteria for analytical transfers is, however, much more difficult than usually described.

In chemical metrology the reliability of the results in international trade is required for the acceptance of the analytical result by the users within the country or outside the country.

The criteria for acceptance of an analytical run specified that the deviation of the predicted concentrations from the nominal concentrations for at least three-fourths of all calibration standards for an analyte and at least two-thirds of all quality control samples for an analyte be within ±15%.

The Joint Research Centre JRCC) of the European Commission in Ispra, Italy, being the Community Reference Laboratory for GMO detection methods, will subsequently test the method and, in a first phase, compare the results with the agreed Method Acceptance Criteria for Analytical Methods of GMO Testing, as formulated by the European Network of GMO Laboratories [ 4].

The average recovery rate (n = 38) for Enterococcus in the effluent was 95.3% with a relative standard deviation (RSD) of 10.5%, well within analytical acceptance standards (U.S. EPA 2009), indicating that no significant observable loss of Enterococcus occurred during the pumping process.

Nahm et al. concluded that medical record abstraction is the most significant source of errors and should be controlled and managed during the course of clinical trials; the acceptance criteria for analytical variables were 10 errors per 10,000 fields and zero errors per 10,000 fields [ 15].

Controls can then be set as procedures or acceptance criteria in the analytical method – analogous to the concept of control strategy (specification) for the drug product development.