The phrase "absorptive material" is correct and usable in written English.
It can be used in contexts related to materials that have the ability to absorb substances, such as liquids or gases.
Example: "The construction of the new building will utilize absorptive material to enhance energy efficiency and reduce noise pollution."
Alternatives: "absorbent material" or "sorbent material".
The "pasta" actually contains what Lackner calls a sorbent – an absorptive material.
Hydrogen has a low density, so it's necessary to confine it either under pressure, which presents a safety hazard, or chemically or in an absorptive material.
Interior surfaces are covered with absorptive material, such as glass fibre or mineral wool in blankets or in horizontal and vertical wedges.
To properly accomplish this, many factors such as geometry, absorptive material properties, flow effects, break out noise, and self-generated noise must be considered.
In the absence of fibrous sound absorptive material, the model can be favorably degraded to the case of an infinite rib-stiffened structure with air or vacuum cavity.
This new generation of digital image detector comprises a thin layer of x-ray absorptive material combined with an electronic active matrix array fabricated in a thin film of hydrogenated amorphous silicon (a-Si H).
When absorptive materials must be especially strong, a glycol-lactic acid type polymer is mainly used.
On so-called Level 1 streets, asphalt would be replaced with absorptive materials, like porous concrete, to soak up excess water like a sponge and to irrigate plantings in the street bed.
Based on the measurements of the parapet used for this study and the absorptive materials in the scale model, a maximum noise reduction of 23 dB was obtained.
Adding absorptive materials on the entire ceiling area and diffusers on each wall increased early-to-late arriving sound ratio (C50) values corresponding to higher clarity.
Adding diffusers on 25% of the ceiling area with the other 75% absorptive was more beneficial for achieving higher G50 and G values than adding absorptive materials on the entire ceiling.
