The phrase "absorption configuration" is correct and usable in written English.
It can be used in contexts related to physics, chemistry, or engineering, where the arrangement or setup for absorption processes is being discussed.
Example: "The absorption configuration of the system was optimized to enhance the efficiency of the energy transfer."
Alternatives: "absorption setup" or "absorption arrangement".
Model developed in absorption configuration is tested.
The FTIR spectra of these samples were recorded in absorption configuration using Nicolet Nexus spectrometer at Brewster's angle (65°).
The proposed cryogenic extractive distillation sequences showed, in terms of costs and CO2 emissions, better performance than the conventional chemical absorption configuration.
The evolution of the cooling capacity measured in adsorption configuration with dimensionless number developed in absorption configuration is plotted for comparison.
A parallel with result obtained with the same experimental apparatus but in absorption configuration (mimicked by a thermosiphon loop) is done.
It solves to a large extent the well known problem of Monte Carlo simulation of optically thick absorption configurations.
We checked different absorption configurations by structure relaxation and find that for all cases, the CF2 will leave away from the graphene, as shown in Figure 4c.
For different artificial absorption configurations, there would be large strain/stress around the absorption site, indicating that the difficulty of forming two covalent bonds between CF2 and graphene is mainly due to the large strain/stress.
The effectiveness of various spray absorption configurations (as shown in Fig. 1 of the paper), which are based on the new technique of "absorption in two-impinging-streams" as well as on conventional absorption techniques in a single spray, were tested by absorbing acetone from air into a water spray.
The disadvantage of the adsorption, permeation, and absorption configurations is that CO2 rather than isobutene is captured, while isobutene is the minor component of the two.
The findings show decreased reboiler energy consumption for the Base case chemical absorption process configuration with 3.74 2.71 MJ/kg CO2 for the modified chemical absorption process configuration of lean vapor recompression with absorber inter-cooling.
