The phrase "absorption areas" is correct and usable in written English.
It can be used in contexts related to environmental science, physics, or any field discussing the capacity of a material or area to absorb substances or energy.
Example: "The study focused on the absorption areas of the wetlands, highlighting their role in filtering pollutants from the water."
Alternatives: "absorption zones" or "absorption regions".
Four absorption areas at 527, 576.5, 1,182.5, 1,429 cm-1 are related to C-C bond stretching and bending frequencies [48].
In this study, along with the first two innovations of Tetracorder method, based on absorption depth and absorption areas in the CR of reflectance curves, some weighting coefficients are calculated.
However, the ratio of the integrated absorption areas at approximately 1476 and 1551 cm−1 (A1476/A1551) for the composites is different, indicating that they have different conjugation lengths.
Dose savings are limited by the performance in high absorption areas (retro-cardiac, infra-diaphragmatic areas), but can exceed 50% in the lung fields (Table 1 ).
The two areas 3626.5 to 2970.7 cm−1 and 1716.8 to 1543.2 correspondingonding to water absorption areas, were not used to calibrate plasma parameters.
Detection of simulated lesions in the lung fields were as high as in CsI-DR, but lesion detection in high absorption areas was inferior to DR [ 44 ].
"The cost of a typical system with a subsurface absorption area would probably be in the $5,000 range," Mr. Longwell said, adding that a sand-mound system, which requires trucking in as much as 100 tons of special sand, could cost five times that amount.
That means the wavelength corresponding to 1 eV is far away from the resonance absorption area.
Figure 3a shows that relative absorption area of the distorted FeIIIO4 tetrahedra was 15.1 (±0.5)%.
The light absorption area of ME13 exhibits an increment of 16.5 19.1% compared to ME07-ME12.
The formula for the absorption area derived here, however, does not contain the reverberation time.
