Exact(1)
The film deposited by a stationary jet had a circular shape with area (where thickness was almost constant) about the nozzle inner diameter.
Similar(58)
Let it preen for about 20 seconds, then bring the nozzle to within about 1.5 inches (3.8 cm).
He added that he responded to "a call a month" about gas spills after the nozzle's automatic shut-off failed.
After passage through a 3 mm diameter skimmer that is located about 100 mm from the nozzle orifice, the beam enters the 2.6-meter long Stark decelerator that consists of 317 pairs of high-voltage electrodes.
The analogy model robustly captures the peak frequency noise, that occurs near Strouhal number of about 1, based on the nozzle exit diameter but leads to major sound under prediction for higher frequencies.
In an ideal inviscid fully expanded jet no shock cells would be present but in the turbulent jet calculations weak shock cells appeared which gradually died out beyond about 10 diameters from the nozzle exit.
As the siding is cleaned, work slowly back and forth with the nozzle about three to four inches off the surface.
An ice fraction of up to about 40percentt was obtained with the nozzle located at the bottom of the ice slurry tank and the jet directed upwards into the water.
Illustrative numerical results are presented and it is shown that an approximately sixfold increase in a mean strain rate function is required to displace the flame from a location where flashback to the nozzle is about to occur to a position so close to the wall that extinction is imminent.
The plane's fuel injection system squirts gas into it, a lighter sets it on fire, and exhaust roars out of the nozzle at about 1750 ºC.
Insert the nozzle gently about 4 inches (10.16 cm) into your rectum.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com