The phrase "a water separator" is correct and usable in written English.
It can be used when referring to a device or system that separates water from other substances, often in industrial or mechanical contexts.
Example: "The engine requires a water separator to ensure that any moisture is removed from the fuel before it is injected."
Alternatives: "water filtration system" or "water extraction device".
For the rest esters, less alcohol is needed with the 5: 1 molar ratio of alcohol to tartaric acid, because the alcohols with more than 4 carbon atoms can compose azeotrope with water which can be separated by a water separator, so less alcohol is needed.
About 40 mL of toluene was distilled off using a water separator.
Method B [13, 14]: Tartaric acid (0.15 mol), n-butanol (0.45 mol), cyclohexane (30 mL), p-toluenesulfonic acid (0.5 g) were added in a 250 ml flask equipped with a water separator.
The air flow supply subsystem includes a compressor, a cooler, a water separator, a back pressure valve, connecting pipes, etc., and is used to provide requisite air flow into the stack cathode.
The resulting oil was dissolved in 50 mL of benzene, 12 mL (8.3 g, 114 mmol) of tert-butylamine was added, and the solution was heated with a Dean−Stark water separator overnight.
The compact membrane reactor unit equipped with catalytic membrane contactor/distributor and membrane water separator outperformed a semi-batch ozone reactor with 60% DEET conversion compared to 20%, and 30% TOC reduction versus 5%.
The water separator is used to recover the water in the exhaust air.
The water in the off-gas of C1 is partially removed in the first water separator B1 after having passed the cooler W3.
In commissioning experiment of the improved HTR-10, a large quantity of high-dose tritium-containing waste water was successfully collected in the water separator of helium purification regeneration system, with the specific activity being 6.1 × 109 Bq/L.
Any thru-port exhaust ports should be sealed with duct tape and the fuel filter and water separator will need to be replaced.
A novel single stage vacuum evaporator, as a salt-water separator, is developed to fully use ultra-low grade heat source as low as 50 °C.
