Sentence examples for a very high strength from inspiring English sources

The absorbing boundary condition used is very high mode with a very high strength thickness, where a minimum level of absorption at the outer boundary is 99.99% [15].

Due to the high sensitivity of viscosity to temperature, the lithosphere acts as the cold rigid thermal boundary layer that has a very high strength.

If a conventional heat treatment is applied to this material, a very high strength can be reached, however with an unacceptable low ductility.

Theses steels are designated as TWIP (Twinning Induced Plasticity) and TRIP (Transformation Induced Plasticity) steels and show at different extents a very high strength and an excellent ductility.

The wire has a very high strength (1840 MPa at η=10.5) and at the same time good electrical conductivity (46% of the conductivity of pure Cu).

To obtain a very high strength, the granular size was optimized by the packing density theory, by excluding coarse aggregate and by providing heat (90 and 400 °C) and pressure treatments.

Moreover, in a fatigue loaded very high strength steel structure absolute and relative stress variations will be higher compared to stresses in structures made of lower steel grades.

Ultra-high performance concrete (UHPC) as a novel concrete material is associated with very high strength and low permeability to aggressive environment.

Therefore, to develop advanced carbon fibers with both very high strength and modulus demands a new manufacturing methodology.

In this investigation a total of 32 specimens were fabricated using very high strength (VHS) steel tubes and plates to form stub columns.

Very high strength (VHS) tubes, with a nominal yield stress of 1350 MPa, are produced for automotive industries in Australia, and may be used in gusset-plate welded connections.