The phrase "a thickness of less" is not correct in standard written English.
It is unclear and lacks proper context, making it difficult to determine its intended meaning.
Example: "The material should have a thickness of less than 5 millimeters for optimal performance."
Alternatives: "a thickness of under" or "a thickness of below".
The result is a bowl that collapses like a spent accordion to a thickness of less than an inch.
The second solution was designed to solve the same problem for specimens with a thickness of less than 1 mm.
The gas hydrate layer builds upward from the base of the stability zone with a thickness of less than 100 m.
A low-frequency miniaturized active control unit, with a thickness of less than 50 mm, is designed using giant magnetostrictive material (GMM).
This paper aims to determine fatigue design curves for SHS-to-plate T-joints where the thin-walled tubes have a thickness of less than 4 mm.
The use of planar PEMFCs in printed circuit board (PCB) technology with a thickness of less than 3.5 mm are presented.
Layers with a thickness of generally less than 1.5 meter are ripped by a bulldozer.
It is backed by a layer of silver 200 nanometres thick, to act as a mirror.The result, a sheet with a total thickness of less than two microns, is the photonic equivalent of a semiconductor: it does to light what a semiconductor does to electricity, namely manipulates its energy levels.
For PBGFs with a 7-cell core, one needs to draw fiber with a ring thickness of less than 0.03Λ to achieve a comparable operational bandwidth.
The liquid films that are formed in the channels of a FFMR are quite stable and have a typical thickness of less than 100 μm.
TEM showed that ZnO nanotubes exhibited a wall thickness of less than 2 nm, with an average diameter of 17 nm and the length is 2 μm.
