"a small height" is correct and usable in written English.
It is typically used to describe a measurement or distance that is small in comparison to something else. For example: - The mountain had a small height compared to others in the range. - She was surprised by how small the height of the building was. - At a small height of 5 feet, she was the shortest player on the team.
"The intent would be to possibly get a small drilling rig in, that could operate in a small height," said Pat Muldoon, senior vice president of Amec Construction, which is working at the site.
A small height is required when the cross section area is constant.
As a result, the finally formed nanowires had a small height.
The electrodes consist of a thin wire electrode with a small height.
This could explain why a small height increase was observed at Chiang Mai simultaneously with the MBW at Kototabang.
In this case, a burst with a small height that provides large throughput should be constructed to avoid slot waste.
Horizontal gas and solids mixing processes may play a dominant role in circulating fluidized bed (CFB) reactors with a small height-to-diameter ratio, which is typical for CFB combustors.
Also, they are, in general, thin layers and have, for the most part, a small height-to-base aspect ratio, which is an significant advantage that allows us, on one hand, to modify essentially the energy spectrum of the particles confined within the heterostructure, making them more stable and, on the other hand, to use simple theoretical models.
In spite of the fact that SAQDs can possess different morphologies such as disks, cones, rings, and lenses[1], they are, in general, thin layers and have, for the most part, a small height-to-base aspect ratio whose typical values vary between 0.029 and 0.067[3].
The results show that the steel plate with a small height-to-width ratio (<1.5) has a middle shearing region and boundary restraining regions at the left and right edges with a width of 1/3 of the height of steel plate.
The small pore opening at the surface prevents the AFM tip to completely enter inside the pore, yielding a smaller height variation.
