Sentence examples for a small bending from inspiring English sources

A small bending along the full length of thoracic spine was also found.

Hairpins are deemed effective because they can be placed close to the anchor shaft using a small bending radius (Klingner et al. 1982; Lee et al. 2010).

The umbilical cables are designed to have a small bending radius, and can be easily adapted for a variety of calibration sources in SNO.

A small bending magnet of negative deflection, called anti-bend, can be used to reduce the equilibrium emittance of a periodic lattice cell by providing the proper matching of the dispersion function to the theoretical minimum emittance (TME) condition.

Simulation results show that the designed PCF has an effectively single-mode operation, a small bending loss below 0.15 dB/m for the bending radius of 5 mm, as well as a stable effective mode area of 80 μm2 whatever the designed PCF is straight or bent, which can connect well with conventional single-mode fibers (SMFs).

Because it produces a small bending moment, the PFNA system acts as an internal splint, and at the same time, it can bear a large axial load.

We also hypothesized that compared with the unconstrained ABA approach, the constrained ABA algorithm will lead to a smoother transformation, and therefore a smaller bending energy.

Nanofibers based on PVA (6 GPa) and PEO (3 GPa) are more elastic (a smaller bending Young's modulus) and therefore are the most suitable for skin and wound tissue scaffolds.

F120 fibrils possess a smaller bending rigidity κ (Table 3 in the Supporting Information) and a larger normalized bending fluctuation Δ u than F140 fibrils.

An eccentric compression test was conducted to investigate the behaviour of tunnel linings under a large compressive axial force (hoop stress) and a relatively small bending moment, which would represent a section at the opposite side of the opening of a tunnel junction.

The posteromedial aspect of the tibia creates a sharp bend; hence, it may be beneficial to create a small bend in the Gigli saw to allow easy passage [3].