Sentence examples for a slow strain from inspiring English sources

It was found that Suzuki segregation resulted in continuously serrated plastic flow for deformation at temperatures from 450 670 °C and at a slow strain rate such as 1.0×10−4/s.

It was found that increasing the SP content resulted in earlier activation and that more MC was driven from SP at a slower strain rate.

A Sacks-Evertson borehole volumetric strainmeter (SE strainmeter) at a site located 105 km from the epicenter of the mainshock recorded a clear slow strain event following the 2003 M w 8.0 Tokachi-oki earthquake (September 25 , 2003 19 50 06 UTC).

Mouse Nat1 was identical in the fast and slow strains and showed specificity for isoniazid while mouse Nat2 catalysed p-aba acetylation and had a point mutation resulting in asparagine 99 in the fast strain and isoleucine in the slow strain resulting in a less stable enzyme (Martell et al., 1992; De Leon et al., 1995).

A simple stress-corrosion cracking (SCC) specimen, suitable for slow strain rate testing and incorporating heat transfer, with an artificial crevice or deposits has been designed and tested.

Hydrogen permeation and slow strain rate tests in a high-pressure hydrogen-containing coal gas, combined with microstructural analysis, were conducted on X80 base metal, weld metal, and coarse-grained heat-affected zone (CGHAZ).

Former studies have pointed out that a simple modification of the design of slow strain rate tensile specimens was particularly convenient for evaluating the susceptibility to intergranular stress corrosion cracking of nickel-base alloys.

The ILM demonstrated a significantly higher capability for energy absorption at slow strain rates compared to medium and fast strain rates.

The SCC susceptibility of the alloy in a simulated human body fluid was established by slow strain rate tensile (SSRT) testing using smooth specimens under different electrochemical conditions for understanding the mechanism of SCC.

Quasi-static tensile tests in air and slow strain rate tests (SSRTs) in a 3.5% NaCl solution were conducted in an ultra-high-strength P/M Al Zn Mg alloy fabricated through powder metallurgy.

SCC was evaluated using the slow strain rate testing technique, straining samples to 10% in a flowing autoclave test facility using 25 MPa SCW at 500 °C with 20 ppm dissolved oxygen.