The phrase "a slot width of" is correct and usable in written English.
It can be used when specifying the measurement or size of a slot in various contexts, such as engineering, manufacturing, or design.
Example: "The machine requires a slot width of 5 millimeters to function properly."
Alternatives: "a width of the slot" or "the slot's width of".
For the 1-butene/air/CO2 mixture analyzed, particle-tracking measurements yielded a characteristic time for growth of 22 ms and a critical slot width of wc = 0.7 cm, which agrees well with the model prediction of wc = 0.75 cm.
Moreover, an application of adaptive slot width of multi-stage device is investigated.
A two-dimensional numerical investigation is performed to study the influence of slot width of multi-stage stationary floating overtopping wave energy devices on overtopping flow rate and performance.
Plots of efficiency versus the relative slot width show that, for multi-stage devices, the greatest hydraulic efficiency is achieved at an intermediate value of the variable within the parametric range considered, relative slot width of 0.15 and 0.2 depending on design layouts.
In order to optimize microwave performance, impedance compensating technology by increasing the slot width of the CPW transmission line is developed.
The experiment was designed at a geometrically large scale, with jet slot widths of 4.2 and 6 mm.
Cut a slit width of 5mm vertically.
Previous reports demonstrated that an increase of mesio-distal slot width, during vertical displacement of brackets, affects the BI by (a) reducing the interbracket distance, which increases the stiffness of the wire and (b) reducing the contact angle (θ c)[4].
Five measurements of the upper and lower mesio-distal slot width, five measurements of the upper and lower slot depth, and five measurements of the slot height were taken for each bracket (Figure 4), and the mean value was calculated (Table 2).
