Sentence examples for a set voltage from inspiring English sources

The device resistance can be reversibly switched between a LRS and a HRS by a Set voltage and a Reset voltage.

When applying the voltage in positive side, an abrupt increase of the device current takes place at a set voltage [Vset].

With continuing the voltage sweeping, a reset voltage of −0.8 V is measured for unit cell from LRS to HRS and a set voltage of 2.0 V from HRS to LRS.

The MIM device was switched from a high resistive state (HRS) to a low resistive state (LRS) at a SET voltage between + 0.65 and + 0.85 V, and were switched from LRS to HRS at a RESET voltage between − 0.4 and − 0.5 V when a compliant current of 3.5 μA was utilized.

Subsequently, using a positive Set voltage, the HRS was switched back to a LRS.

A uniform set voltage distribution range from 1.1 to 1.5 V was measured.

The exponential nature of the time vs voltage characteristics suggests that a higher SET voltage can drastically reduce the time to SET the memory cell.

Figure 8a shows the I V characteristics of the device with RESET voltages of 5.0, 5.5 and 6.0 V with a constant SET voltage of −5 V.

A tight set voltage distribution will make it easier to choose proper amplitudes of reference voltage applied on the input cell and the supply voltage applied on the output cell.

They include the repeatability of switching cycles (>103), a larger SET voltage (VSET) of approximately 0.6 V (due to the greater barrier height for holes or Cuz+ ions), stability, and long AC endurance (>105 cycles) when operated with a small voltage of ±1.5 V.

Full sampling was used to record spikes, detected with a manually set voltage threshold.