The phrase "a set pressure" is correct and usable in written English.
It can be used in contexts related to physics, engineering, or any situation where a specific pressure value is established or maintained.
Example: "The system operates efficiently when maintained at a set pressure of 30 psi."
Alternatives: "a fixed pressure" or "a specified pressure".
Distilled water or 0.05% (w/w) sulfuric acid is pumped through the reactor to purge air and then used to pressurize the reactor to a set pressure of 225 to 1,245 psi.
For real-gases at a set pressure of 40 bar oscillations have been observed during closing of the valve.
The influence of the nitrogen (N2) partial pressure in the discharge atmosphere, with a set pressure of 0.133 Pa, was examined.
The 100 μL of aerosol bolus had a mass median aerodynamic diameter of 1.9 μm with 80% of the droplets being less than 5.5 μm at a set pressure of 1.6 bar (22.8 psi).
However, the lung volume achieved with a set pressure is dependent upon the mechanics of the respiratory system, the maturational stage of lung development and the volume of lung liquid remaining within the air spaces.
By default, postoperative therapy with continuous positive airway pressure (CPAP) was applied in patients with postoperative atelectasis, pleural effusion and after a prolonged intubation time (>48 hrs).. CPAP therapy was usually applied with a set pressure of 5 mbar and a pressure support of 10 mbar, adjusted to an inspiratory tidal volume of 6 to 8 ml/kg body weight.
At a higher set pressure the flow force continually decreases, which indicates that only a sufficiently fast inlet pressure rise forces the valve to open.
Our calculation shows that the adsorption force of steam is always higher than that of air, resulting in a lower set pressure disregarding the use of different PRVs.
Pressure coefficients obtained from a set of pressure taps under the corner vortex are also investigated and presented.
The dipleg was equipped with a set of pressure transducers along its axial height for measuring pressure (as shown in Fig. 1).
Measurement system consisted of a set of pressure sensors and thermocouples inside and outside the enclosure.
