The phrase "a section width" is correct and usable in written English.
It can be used in contexts related to measurements, particularly in fields like engineering, automotive, or construction where specific dimensions are discussed.
Example: "The tire specifications indicate that a section width of 205 mm is required for optimal performance."
Alternatives: "a width measurement" or "a dimensional width".
A maximum section width of 3 mm with a minimal or no inter-slice gap and a small field of view (FOV) are needed [15].
Images were reconstructed using a 5-mm section width, a 5-mm interval and a body standard axial filter (FC13).
Results similar to those found for a tracked machine were also achieved by three passes of a 900 mm section width tyre at 5 t load and 0.5 bar inflation pressure.
We assumed that both ends of the leaf spring are supported by the beam with a rectangular cross section (width is b, height is h, and length is l).
In the Discovery STE scanner, whole-body CT was performed using a continuous spiral technique with a 16-slice helical CT (140 kV, 30 170 mAs with an AutomA mode, section width of 3.75 mm) 60 minutes after the injection of FDG (5.5 MBq/kg).
While noting by b y) the section width to an ordinate y, then the Eq. (6) became: left{ begin{array}{l} N_{{int}} = iint {varphi left( {delta u + delta w cdot y} right) cdot bleft( y right) cdot dy} hfill M_{{int}} = iint {varphi left( {delta u + delta w cdot y} right) cdot y cdot bleft( y right) cdot dy} hfill end{array} right.
Comb a section the width of your roller forward and then hold it up away from your head.
The analytical derivations are based on results of an extensive series of numerical parametric study of this type of connection, covering a range of design parameters, including tubular section size, tubular section width to thickness ratio, reverse channel flange size and gap between the reverse channel flanges.
Sectioning of embryos (embedded in 4% low-melt agarose) was performed on a Leica VT1200S Vibratome with a speed of 0.7 mm/s, amplitude of 3.0 mm, and section width of 150 µM.
And the section width and height are both 300 mm with a concrete cover of 40 mm.
