The phrase "a sealing layer" is correct and usable in written English.
It can be used in contexts related to construction, manufacturing, or materials science, where a layer is applied to seal or protect a surface.
Example: "To ensure the longevity of the structure, we applied a sealing layer to the roof."
Alternatives: "a protective layer" or "a barrier layer".
The method uses a surface or subsurface soil layer as a sealing layer with no need to place an air-tightening sheet on the ground surface.
Cement-based materials can be used as a sealing layer in compressed air energy storage (CAES) underground storage caverns to ensure airtightness.
This resistance is attributed to the formation of a sealing layer made of crystalline Ca apatite phase (based on Ca2Gd8(SiO4)6O2) as a result of the high-temperature chemical interactions between the APS Gd2Zr2O7 TBC and the CMAS glass.
The integral of all width functions w j (x) for an REH equals the REH drainage area A j : Fig. 1 Leaf cover on agricultural hillslopes is very sparse, which enhances rainfall impact at the soil surface and results in the formation of a sealing layer that impedes the infiltration process.
Generally, for a TBC ceramic to be highly effective against CMAS attack it must interact vigorously with the molten CMAS, which must result in the rapid crystallization of the refractory oxide phase(s) that form a sealing layer, arresting further penetration of the molten CMAS.
The inner side of the tray was coated with a thin APET as a sealing layer against the covering foil.
Thin-film composite (TFC) hollow fiber membranes consist of an inner polyamide selective skin and an outer polyamide sealing layer were successfully fabricated by double interfacial polymerizations on a tailored polyethersulfone (PES) fiber substrate (termed as dTFC-PES).
c CrN-TiO2; CrN coating with a 20 nm TiO2 sealing layer.
b CrN-Al2O3; CrN coating with a 20 nm Al2O3 sealing layer.
The application of the ALD oxide sealing layer showed a positive effect on increasing the corrosion resistance of the CrN coatings.
The device structure consists of three assembling parts: (1) the nanofluidic channel fabrication, (2) integration of electrical components, and (3) microfluidic channel fabrication for the liquid reservoirs on either side of the nanochannel, including a top poly-dimethylsiloxane (PDMS) sealing layer.
