Sentence examples for a roughness analysis of from inspiring English sources

Both a statistical analysis of coating thickness and a roughness analysis of the coating/substrate interface and the coating surface were carried out for the as-sprayed coatings using scanning electron microscope images.

Figure 6 Image showing surface roughness analysis of NiTi wire of NiTi-ICE group.

Figure 3 shows the 2-D AFM image and the roughness analysis of the ZnO thin film.

A graph of the studied frictional load (N) vs time (s) of one of the tested groups is shown in Figure 7. Figure 5 Image showing surface roughness analysis of FRPC wire of ICE-FRPC group.

Atomic force microscopy (AFM) was used for roughness analysis of N implanted as well as as-polished surfaces.

The roughness analysis from the AFM showed that the surface roughness (RMS value) is just 5.899 nm. Figure 3 AFM image and roughness analysis of the ZnO thin film.

Open image in new window Fig. 4 a AFM images of patterned catalyst, b line profiles of pattern with applied secondary etching (0 0.5 nm), and c roughness analysis of the catalyst surface.

The average surface roughness (Ra) and mean-square-roughness (Rms) were obtained from the roughness analysis capacity of WS × M software [24].

We also examined the RMS roughness analysis as a function of the correlation length from the 20 × 20 μm2 AFM images.

Field emission scanning electron microscope surface and cross‒sectional images support the atomic force microscope roughness analysis that shows a significant compressibility of the deposited TiO2 nanoparticle coating with decrease in the surface roughness and nanoscale porosity under external pressure.

Figure 6 shows the box plot of the roughness analysis with implant 5 having the widest distribution of measured values.