The phrase "a register file" is correct and usable in written English.
It can be used in contexts related to computer architecture or digital systems, specifically when discussing components that store data temporarily.
Example: "The CPU accesses data quickly from a register file to perform calculations efficiently."
Alternatives: "a register storage" or "a register memory".
The key components of the datapath are a register file and cascaded ALUs.
We present a microarchitecture solution based on a register file holding basic blocks of instructions.
As Figure 5 shows, the two main modules of each PE are a Register File and an ALU.
The architecture also includes two multipliers, 13 general-purpose registers and a register file with 16 places.
An example of a register file with one read and one write port, connected to the interconnection bus.
Multiple operation cells then are connected to compose a register file with the ability of performing SIMD operations called "Multimedia Operation Storage Unit (MOSU)".
Figure 13 Relative energy consumption in (a) register files and (b) interconnection network.
We present energy comparison relative to fully connected architecture for (a) register files, (b) interconnection network, (c) decode, and (d) instruction fetch.
simpler light-weight ALUs, supporting only those operations needed, fewer multipliers, or sequential multipliers in the vector path, narrower data path, for example,, when a lower throughput is required, a reduced feed-forward (bypass) network, supported by a scheduler, a smaller register file in the vector path, VLIW instruction compression, and so forth.
The core of the architecture consists of a Global Control Unit, three predicated VLIW Functional Units, a Predicate Register File and a Coarse Grain Array (CGA) module.
The addition of read and write ports improves the cycle count to a lesser extent than software bypassing, with exception of the gsm benchmark, where bypassing with a single register file with a single read and single write port does not improve performance as much as the addition of read and write ports or more register files.
