Sentence examples for a reduction of effective from inspiring English sources

A reduction of effective dose up to 70% has been achieved with minimal effects on lung quantitative results.

A reduction of effective dose up to 70% can be achieved with minimal effects on lung quantitative results.

In this study, we have shown that a reduction of effective dose up to 70% can be achieved with minimal effects on lung quantitative results and that low-dose CT could therefore be a valuable tool for the characterization of lung compartment distribution and possibly for monitoring the time-course of ARDS with a lower risk of exposure to ionizing radiation.

This study demonstrated that a reduction of effective radiation dose of up to 70% can be achieved with minimal effects on lung quantitative results and that low-dose CT could therefore be a valuable tool for the characterization of lung compartment distribution and possibly for monitoring the progression of ARDS, with a lower risk of exposure to ionizing radiation.

The simulations reveal that the advantages of the multi busbar design originate from a reduction of effective finger length, opening up new possibilities for the cell design.

Penetration from the IOFP was also observed, which indicated a reduction of effective stress and therefore shear strength within the samples IOF.

In the macroscopic responses, prior transverse direction loading resulted in widening of the reorientation plateau, a reduction of the effective Young's modulus, and substantial alteration of effective Poisson's ratios during axial direction straining.

Based on a reduction of lane effective width and the Gap Acceptance Theory, two effect models describing curb parking and road capacity were constructed.

An increment in the rolling angle causes a reduction of the effective diameter of the wheel and therefore a reduction in the wheel speed.

Even if the amplitude and phase are perfectly adjusted in both loops, a delay difference between the upper and lower branches of a cancellation circuit causes a reduction of the effective bandwidth.

Fluid pressures within the faults/cracks further increased, resulting in a reduction of the effective normal stress on faults/cracks (e.g., Hubbert and Rubey 1959; Terakawa et al. 2013; Terakawa 2014).