Similar(60)
Within each 2D building boundary, a constant roof height is extracted based on statistical calculations of the height values.
The building height is set to the number of stories multiplied by a story height of 2.5 m and adding a roof height of 0.5 m (14).
The building height H is set to the number of stories multiplied by a story height of 2.5 m and adding a roof height of 0.5 m (14).
For eq 4, H is in units of m, and is set to the number of stories multiplied by a story height of 2.5 m and adding a roof height of 0.5 m (14).
Tower Two, or 200 Greenwich Street, will have a roof height of 1254 feet and a 96 feet tripod spire for a total of 1350 feet.
Tower Three, or 175 Greenwich Street will have a roof height of 1,155 feet (352 m) and an antenna height reaching 1255 feet.
The shelters consisted of wooden frames with a slanted roof (4:12 pitch; 1 m above ground at the lowest point of the roof), mounted on nine support posts with an average roof height above vegetation of 1.6 m.
An energy absorption phenomenon was revealed by observing a reduced rebound height when the lattice exhibited the snap-through behavior.
Smaller deviations occurred where the laser scanner result (which is obtained by averaging the height of all samples across an extended roof section) was affected by local pockets in the roof that led to an overestimate of the roof height, which again highlights the advantage of the radar for this application.
They showed a clear midface retrusion, a reduced upper facial height, an increased lower facial height, and an excess interorbital width.
a Along the direction of roof height b along the direction of face advance.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com