Sentence examples for a permissible limit from inspiring English sources

In addition, other chlorine compounds such as lindane do not have a permissible limit in vegetables.

All the samples show the values more than a permissible limit (0.01 ppm) define by WHO, which can be harmful for human health (Fig. 5).

According to the Indian standard the study area, villages Danispet, Nagalur, Yercaud, Kunjandiyur, Navapatti, Ettapur, Siruvachur, Thalaivasal, and Gangavalli have desirable amount of TDS in drinking water and rest of the villages except Koranampatti and Kunnipalayam have a permissible limit of TDS in drinking water.

The presence of phenolic compounds represents a serious potential hazard for human health and aquatic life, and that is why phenols have been registered as a priority pollutant by the US Environmental Protection Agency USEPAA) with a permissible limit of 0.1 mg/l in wastewater (Srivastava et al. 2006; USEPA 1985).

In response to concerns about respiratory symptoms caused by exposure to a variety of dusts, the Occupational Safety and Health Administration (OSHA) set a permissible limit for nuisance dust in the workplace (OSHA 1993).

This figure clearly shows that a not permissible limit of Aluminium (0.2 mg/l) was observed in the central portion and small patches of western portion of study area.

Our present understanding of the metal demands the limit to be set at 10 μg/L but the lack of adequate testing facilities at such low concentrations in countries with this problem makes them adhere to a high permissible limit.

It is evident that the Seybouse water had a magnesium concentration within the permissible limit of 100 mg/l.

According to WHO specification, all the water samples show a higher concentration beyond the permissible limit (0.003 ppm).

It was also observed that 5 g/L iron ore of particle size <0.075 mm reduced 10 mg/L fluoride to a level below the maximum permissible limit (1.5 mg/L) of fluoride in drinking water.

The computational fluid dynamics (CFD) analysis is performed to obtain the minimum mass flow rate of the coolant which is necessary to keep the structure's temperature below the permissible limit at an acceptable pressure loss.