Sentence examples for a normal strength from inspiring English sources

The concrete used for all specimens was a normal strength concrete cast in the laboratory.

However, we think that, for evaluating the public health impact of alcohol, a measurement error of below 1% vol is sufficient for the purpose (e.g. to determine if the sample in question has a normal strength around 38-40% vol or is higher than 50% vol).

Specifically, the MRC sum score incorporated the MRC score of deltoid, biceps, wrist extensors, abductor pollicis brevis, iliopsoas, quadriceps femoris and tibialis anterior on both sides, with a normal strength score achieving a total of 70.

Thus, we calculated consumption according to the conversion measures introduced in 2007 to the General Lifestyle Survey GLSS): iv one pint of a normal strength beer is equivalent to 2 units, a 175 mL glass of wine is equivalent to 2 units and a 250 mL glass of wine is equivalent to 3 units.

A numerical study was used to study the response of a normal-strength concrete (NSC) column that was not design for blast resistance subjected to four levels of idealized blast loads.

Owing to this additional mechanical bond component, it is well known that the yielding of a normal-strength steel rebar with f y of 400 MPa is obtained when the embedment length is equal to or 2 times higher than the rebar diameter (2d b ) (Yoo et al. 2014b).

A unit of alcohol is roughly half a pint of normal strength lager, a small glass of wine or a single measure of spirits.

The smooth surface of CNT and GNP resulted in poor resistance to sliding separation, but, unlike CNT and CNF, GNP could resist normal separation and had an interfacial normal strength that was higher than the shear strength.

Indeed, the first matchlock mosquetes ("muskets") fielded by Spanish infantry weighed as much as 25 pounds (10 kilograms) and usually required a forked staff as a rest to enable a man of normal strength to fire them accurately from the shoulder.

Where τ f is the unsaturated shearing strength; c′0 is the effective cohesion; φ′ is the effective friction angle; σ-u a is the pure normal strength; u a-u w is the matric suction and φ b is the friction angle related to matric suction.

The results obtained demonstrate the possibility of producing an AABC of "normal strength", with an equal or even higher compressive strength than the OPC concrete, designed and produced in an equivalent manner to the AABC, and a clear environmental advantage as its carbon footprint (GWP) is 44.7% lower (AABC = 210.90 kg CO2 eq/m3 vs. OPC = 381.17 kg CO2 eq/m3).