The phrase "a mesh with a" is grammatically correct and can be used in written English.
It can be used when describing a type of connection or interaction between two elements, often in a technical or metaphorical context.
Example: "The design features a mesh with a unique pattern that enhances its structural integrity."
Alternatives: "a network with a" or "a framework with a".
The proposed method is shown to be capable of generating a mesh with a good balance of orthogonality and smoothness in the entire domain.
Our transobturator mesh system uses a mesh with a smaller surface area than previous ones, resulting in fewer complications while maintaining low recurrence rates.
Using a finer discretization (i.e., 1 voxel) would result in a mesh with a vastly increased number of degrees of freedom (i.e., more nodes and elements), which would, in turn, prove problematic for computational tractability, both at the meshing stage and for the simulation of electrical activity.
The horizontal plane of reference is defined as a plane interpolated from the mesh points located on the surface of the SB (the basic assumption was to have at least 30 points; however, we used a mesh with a density of 3 × 3 mm that always gives no less than 100 points and usually over 150 points).
Because an element (no matter it is a tetrahedron, a hexahedron or any other shape) in a mesh is on average much larger than the mean free path of a photon, a mesh with a simpler shape shall be more efficient for the photon-mesh intersection test.
Results are obtained for a sphere with a size of 26λ using a resolution based on a mesh with an average edge length of about 2λ, where λ is the wavelength.
Collagen fibers formed a mesh with an average pore size of 0.6 ± 0.2 μm (mean ± SE); the gels had a shear modulus of 58 Pa and a thickness of 474 ± 7 μm (mean ± SE) (Fig. 1 C ).
We present a novel approach to parameterize a mesh with disk topology to the plane in a shape-preserving manner.
A horizontal plankton tow was taken from the surface layer using a net with a mesh-size of 35 μm.
The Manly sub model generated a triangular mesh with a maximum triangle area of 2 m2.
Cages were made of a rigid plastic mesh with a 13 mm by 13 mm grid.
