Your English writing platform
Discover LudwigSuggestions(5)
The phrase "a maximum strength of" is correct and usable in written English
It can be used when discussing limits or capacities, particularly in contexts related to physical strength, materials, or performance metrics. Example: "The material can withstand a maximum strength of 5000 psi before failing."
Exact(21)
While a maximum strength of 37.9 MPa is reached at 90 days for specimens cured at 80 °C.
A maximum strength of 57.4 MPa was observed for the specimens 2.0 70 which also attained the highest density, 92%.
It's gradient coils have a 74 cm internal diameter and provide a maximum strength of 22 mT/m, a rise time of 400 μs for the x and y directions, and 315 μs for z.
A maximum strength of 555 MPa was observed at 1000°C, which as far as we know is the highest 1000°C strength ever observed for silicon nitride joined without high applied pressure.
It attained a maximum strength of, and made landfall near Puerto Cabezas on September 20.
The Germans initially set a maximum strength of 17,000, but the SDS quickly reached a strength of 18,500.
Similar(39)
The results obtained indicate that the preloads on the steel tubes significantly reduce the stiffness and strength of CFST slender beam-columns with a maximum strength reduction of more than 15.8%.
Though a maximum strength loss of up to 26% was observed, the values were only 3 9% for 25 100% FNS contents in the mixtures containing 30% fly ash.
However, also other physiological factors such as a lower maximum strength of the lower limb muscles and a decrease in skeletal muscle mass in general [ 29], a slower rate of force development and transmission, and a reduction in elastic energy storage and recovery in tendons could cause a decrease in cycling performance with increasing age [ 46].
The finding of a maximum strength relative to geometric dimensions should be accounted for in designing with 3D printed materials.
In tension tests, the scaffolds showed an average maximum strength of 0.60 MPa (no indexing condition in the B direction) and 1.37 MPa (indexing in the B direction).
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com