The phrase "a maximum expect" is not correct in written English.
It seems to be a misphrasing, possibly intended to convey a concept related to expectations or limits.
Example: "We should set a maximum expectation for project completion to ensure we stay on track."
Alternatives: "a maximum expectation" or "the highest expectation".
For the YIN algorithm, a maximum expected period of 20 ms, i.e., minimal expected frequency of 50 Hz, was set, hence the lowest plotted value is higher than that for the other algorithms.
For example, for anchor 3 in Table 2, a calculated distance of 11.3 m with an error on distance of 0.234 gives an expected small distance of 11.3 times 10-0,234 or 6.6 m and a maximum expected distance of 11.3 times 10+0,234 or 19.4 m.
Dense disparity maps are computed at a rate of 76 frames per second for input stereo pairs of 1280 × 1024 pixel resolution and a maximum expected disparity equal to 15.
The maximum displacement of the bridge superstructure obtained from the FE model due to a maximum expected temperature change of ±42°C during the lifetime of the bridge was applied to the substructure model.
This paper presents an evaluation of peak power flux densities for a WEST ITER-like tungsten monoblock plasma facing component which is vertically misaligned with respect to the other components of a maximum expected value of +0.3 mm, for steady state convected plasma power with ion temperature ranging from 10 to 500 eV.
Where traditional probabilistic techniques focus on a single volcano for which the hazard is estimated independent of the probability of the eruption occurring, the framework reported here is based on the premise that the ash fall hazard associated with a given site may represent a maximum expected hazard from multiple sources.
Given knowledge of a maximum expected interaction density a constant and conservative fraction of the force in equation 3 could be applied over any time-step.
Given a maximum expected read length M (∼250 bp for the Roche 454 FLX protocols and kits), L should be longer than ROI, such that L>M, L≥ROI+2P, and M≥ROI+P; therefore, the final read length will include at least (from 5' to 3') one complete primer with identification-tag and the full region of interest.
Here, we briefly recall the scoring of PETfold, which is a maximum expected accuracy scoring method.
Captured gene fragments were identified if a homologue had a maximum expected value of e 10 in the silkworm, or of e 5 in a species other than silkworm.
