The phrase "a maximum brightness of" is correct and usable in written English.
It can be used when discussing the highest level of brightness that a light source, display, or similar object can achieve.
Example: "The new LED lamp boasts a maximum brightness of 1000 lumens, making it ideal for outdoor use."
Alternatives: "the highest brightness level of" or "a peak brightness of".
Yet it is one of the brightest projectors available, with a maximum brightness of 2,000 lumens of light, meaning that presentations are visible even with the lights on.
Saturated red emission is obtained with a maximum brightness of 1385 cd m−2 and a luminance efficiency of 0.66 cd A−1.
A single-layer light-emitting diode using TPA-PPV as the emitting layer exhibited a maximum brightness of 790 cd/m2 at a bias of 8 V, while the control device employing commercially available MEH-PPV as the emitter showed a maximum brightness of 250 cd/m2 under 11 V.
The evaporated device exhibited a maximum brightness of 1753 cd m−2 and a luminous efficiency of 0.74 cd A−1, which are among the best data ever reported for thieno-[3,4-b]-pyrazine derivatives so far.
Electroluminescent device with a configuration of ITO/NPB/BPPA/BCP/Alq3/LiF/Al showed a maximum brightness of 3760 cd/m2 at 14.4 V with the CIE coordinates of (0.16, 0.16).
Among them, DCzSiCz-based device demonstrates the best performance, showing a maximum brightness of 6600 cd m−2 at 11 V and maximum luminous efficiency of 8.40 cd A−1 at 5 V.
It has a six-segment colour wheel, a maximum brightness rating of 3,200 lumens, a maximum contrast of 22,000 1 and a Blu-ray-ready resolution of 1,080p.
Among these, the single emissive layer PhOLEDs from B3 exhibited the best electroluminescent performances with a maximum luminous efficiency (LEmax) of 10.7 cd A−1 at a current density of 4.6 mA cm−2 and a maximum brightness (Lmax) of 4604 cd m−2.
A maximum brightness temperature of 353 K is observed in April 2007 indicating very high level of RFI.
In the device A, the maximum brightness of compound 1 is 5857 cd m−2 at 11 V with the luminance efficiency 1.84 cd A−1.
As the brightness of the sample (i.e., fluorescence intensity at maximal [Ca2+]) strongly influences the SNR, this analysis was initially performed at a fixed maximum brightness of 1000 photons (e.g., the signal resulting from four detected fluorescence photons per excitation pulse at a 3 µs pixel dwell time).
