Dynamic exclusion was enabled with a repeat count of 1 within 18 s, a mass list size limit of 500, an exclusion duration of 10 s, and a low mass width and high mass width of 30 ppm.
The unpatterned films with a lateral dimension of 5×5 mm2 were measured in a strip line permeameter in a frequency range up to 5 GHz and exhibited ferromagnetic resonance frequencies between 2 and 2.5 GHz within a low-loss permeability spectrum (low width of imaginary part of permeability).
An average silhouette width of 1.00 is equivalent to consistently deciphering the same mutational signature, whereas a low silhouette width indicates lack of reproducibility of the solution.
Due to the low width of the gap and a relatively large area of measuring plate, it can be assumed that the force lines of electric field are perpendicular to the measurement plates (Figure 5(B)).
The present work mainly focuses on the natural convective heat transfer in the inclined rectangular cavities with low width-to-height ratios, through both experimental and computational fluid dynamics (CFD) analyses.
Our investigations suggest that in-channel geomorphic diversity over decadal scale in rivers with low width-to-depth (W/D) ratio is caused by periodic incision/aggradation, but it is driven by channel avulsion in rivers characterized by high W/D ratio.
The Sunda Shelf provides conditions particularly suited for reconstructing its depositional history due to a low gradient and extreme width, the presence of huge paleo-valley systems and abundant filled channels, tectonic stability during the Quaternary, and high sediment input due to a large catchment area.
Although we also observed a close positive correlation between geometric-mean width and the ability to induce CL in eight samples < 1.8 microm in width at 15 min (r(2) = 0.8760), a sample of 2.4 microm in width had a low ability to induce CL.
Hence, the time delay between modes is large resulting in a wide pulse width and a low BER of 4.65 × 10−2.
When the permalloy layer thickness is reduced to ≤ 1.6 nm, the multilayers exhibit a large critical load, a small scratch width and a low residual scratch depth.
The left and right walls of the rectangular enclosure keep a high temperature T H, and the top and bottom walls keep a low temperature T C. The width and height of the rectangular enclosure are W and H respectively Table 1 Thermo-physical parameters.
