The phrase "a layer of high" is not correct and does not convey a clear meaning in written English.
It may be intended to describe a layer of high altitude or high quality, but without additional context, it is ambiguous.
Example: "The atmosphere consists of a layer of high pressure that influences weather patterns."
Alternatives: "a layer of elevation" or "a layer of intensity".
In all cases a layer of high dislocation density was found near the surface.
The proposed slab system consisted of conventional reinforced concrete slab topped with a layer of high strength ferrocement composite containing various contents of HCWA by total weight of binder.
The initial configuration is similar to a lock-exchange, but the particles are submerged in a layer of high concentration as well.
Thus, a layer of high electrical resistance can be repeatedly formed and removed by the present processing methods.The friction force increased rapidly at the edge of the groove of the mechanically processed area as shown in Figure 8c, similar to that in Figure 3c.
Deteriorated concrete was removed, the dam body was regrouted and the upstream face of the dam was provided with a layer of high strength concrete in the top 45 feet.
The samples were sealed in the chamber by a 170 microns thick flat sheet of borosilicate glass with the seal being provided by a layer of high vacuum silicone grease between the plastic and the coverslip, then oversealed with DPX mounting medium.
A control architecture consisting of a layer of high-performance GSHFs(one for each plant model) and some other layers of simultaneous stabilizing GSHFs is introduced.
To avoid any eccentricity, each column specimen was adjusted in such a way that the center line of axial loading coincides with the longitudinal axis of the column, and to ensure the complete contact with the loading plates, the top and bottom end surfaces of each column specimen were leveled with a layer of high-strength plaster powder.
The humidity sensors used in this study could nevertheless reveal the presence of a layer of higher moisture content at a depth of 4 cm.
The N2 results with 10-min resolution in Fig. 17 indicate a layer of higher N2 at 4 5 km altitude throughout the campaign period.
The flow patterns formed a layer of relatively high velocity region adjacent to the wall.
