The phrase "a lateral offset" is correct and usable in written English.
It can be used in contexts such as engineering, architecture, or design to describe a horizontal displacement or shift from a reference point.
Example: "The design requires a lateral offset of two meters to ensure proper alignment with the existing structure."
Alternatives: "a horizontal shift" or "a side displacement".
It is also the first report to highlight that EPT reduces the heat induction near implants placed with a lateral offset from isocenter in comparison with CPT.
Numerical calculation shows that when there exists a lateral offset of 10, 20 or 50% of the one side gap, the critical voltage drops 25, 40 or 72%, respectively.
Where the misfit dislocations reside, however, in regions of poor match, a lateral offset exists between the two crystals and disrupts the perovskite structure: on the core plane (the symmetry plane) of the misfit dislocations a (200) TiO2 layer of SrTiO3 continues as a (200) SrO layer in SrZrO3.
This paper presents a fully compliant, potentially monolithic, power transmission mechanism which can rectify a large lateral offset between two parallel rotational axes.
Pores in the nuclear envelope consist of tetramers with a variable lateral offset that may allow the opening to be adjusted according to the size of molecules passing through.
A cascade control structure, consisting of an inner orientation error controller and an outer lateral offset controller, is proposed for the high level to drive the robot to track the desired trajectory.
This paper presents an automated method for measuring a vehicle's lateral offset for such an application.
The two temperature probes were placed on the grid at the two sides of the tank, each with a 20-cm lateral offset from the isocenter of the scanner.
For the initial measurements, the CoCr stem with the attached stainless steel head was positioned at a 20-cm lateral offset from the isocenter of the magnetic axis on both sides in successive experiments that both were repeated with CPT and EPT, respectively.
It also has the effect of introducing a small fixed lateral offset Δr between the OCT and FP sensor interrogation beam.
Due to the design of the implant system used in this study and geometry of the composite bone, a 4 mm lateral offset was necessary to allow the long-stemmed implant to be implanted into the femoral canal, as is often the case clinically.
