Sentence examples similar to a joint face from inspiring English sources

To respect and coordinate the therapists' preferences (e.g., preferences in working days and time schedules) they will be assigned in a joint face-to-face session at the beginning of the study.

The second example deals with a thin welded lap joint characterized by a jointing face width to thickness ratio d/t ranging from 0.5 to 5. The third example investigates the case of an inclined crack departing from the slit tip of a welded lap joint.

It was observed from the investigation that the 'GLD' specimen seized to function under reserve loading and the lack in proper anchorage of beam bottom reinforcement formed a huge crack at the joint face.

The main geometrical influencing parameters, plate thickness ratio and joint face width ratio, are varied systematically for a main plate thickness of 10 mm.

However, if dowel bar spacing decreases to less than 203 mm (8 in), a horizontal plane of weakness in the concrete slab at the joint face will occur.

For instance, DeepID2 [22] and DeepID2+ [23] utilize the idea of joint face identification-verification to reduce intra-personal variations which leads to a significant improvement on face recognition accuracy.

For all specimens, moments were determined for Beam 1 element (Fig. 7a) at the joint face using the data taken from load cell which is embedded in the pendulum support.

Further, the upgraded specimens with adequate energy dissipation could even be able to shift the plastic hinge from the joint face into the beam which was not observed even in original 'Ductile' specimen.

Developmental activity at the symphyseal joint face has been recorded as occurring until 35 40 years of age.

Lay the box on a flat surface with the open joint facing up in the center of the box.

Flatten the box and lay it on a flat surface with the side joint facing up and in the center of the box relative to the edges.