The phrase "a joint connection" is correct and usable in written English.
It can be used to describe a shared or mutual link between two or more entities, such as people, organizations, or systems.
Example: "The project was successful due to a joint connection between the two companies, allowing for better collaboration and resource sharing."
Alternatives: "a shared link" or "a mutual connection."
The PFCI is a single-layered wound solenoid of nine turns with a transition joggle in the centre section of the winding and an intermediate joint connection between the upper termination and the main coil winding.
The experimental results showed that an improved performance of the joint connection is achieved using connectors with more number of tabs, greater thickness and improved profile of the upright and larger depth of the beam.
A recent review on cystic adventitial disease reported joint connection with arterial wall cysts in 13% of reported cases, regardless of the affected artery [8].
In this study, effects of spherical clearance joint and flexible joint connection on the mechanism vibration are presented.
Researching the practical deformation behavior of the joint area, and designing safe, reliable, reasonable, and economical steel frame joint connection is important.
X-ray computed tomography of a pine tree revealed three main features of tree branch joints which provide high structural efficiency and damage tolerance: integrated design with the branch embedded into the centre of the trunk; three-dimensional fibril lay-up in the principal stress directions; and variable fibril density to achieve iso-strain conditions through the joint connection.
The dynamic relative displacement measurements are analyzed with a time-frequency analysis method, i.e. continuous wavelet transform, which is a well-practiced signal processing technique to identify the structural condition change, namely the loosen bolt damage in the joint connection of steel truss bridges under ambient vibrations.
The study on joint connection rigidity dates back to 1930s both at experimental and analytical front.
But the studies on joint connection for cold-formed steel particularly on pallet rack system are only decade old.
Information about building floor plans, structural member joint connection detailing, material strength test, and soil investigation reports that is necessary to carry out such analysis often are limited or inaccessible.
For the door assembly process, hemming connection is set between the inner panel and the outer panel, the solder joint connection is set between the inner plate and the reinforcing plate, the buckle connection is set between the interior trimming panel and its accessories.
