Sentence examples for a higher roughness of from inspiring English sources

The nanoholes and cracks are known that a higher roughness of CPW surface increase the RF current flow.

Films made with TiO2 composites show a higher roughness compared to those of ZnO, as shown in Figure 3, a known factor which affects the performance of devices.

Higher roughness of the coating must not be detrimental to the function parts; sharp protrusions may not cause injury.

And, the higher roughness of surface enhanced the electrochemical catalytic performance of the I3 − reduction activity.

This is due to higher roughness of these structures and surface area ratio [26].

It is probably due to both lower wettability (caused by desorption of oxygen-rich compounds during annealing) and higher roughness of the samples.

Thicker TiO2/Ag films also exhibited (i) a better UV-induced hydrophilicity, (ii) lower values of the optical band gap Eg and (iii) higher roughness of the films (see Table 2 and Fig. 6, respectively).

This likely resulted because of the higher roughness of the forest canopy compared with grass, which would increase the aerodynamic conductance.

The higher roughness of collagen-based films compared with gelatin-based films (Figs. 3 and 4) could be attributed to the presence of larger fibre bundles in collagen films compared with the finer scale microstructure of gelatin films (Fig. 2).

With a high roughness a contact angle of 160° was observed.

For the film grown at Au, its surface has a relatively high roughness of 6.38 nm.