The phrase "a high strength of" is correct and usable in written English.
It can be used when discussing the intensity or magnitude of a particular quality, such as strength in materials or characteristics in various contexts.
Example: "The new alloy exhibits a high strength of resistance to corrosion, making it ideal for marine applications."
Alternatives: "a strong level of" or "a significant degree of".
Both alloys have a high strength of about 2 GPa.
The obtained materials exhibit well-expressed mesostructure and superbasicity with a high strength of 27.0.
The strongest Ti Fe Co alloys have a hypereutectic structure and exhibit a high strength of about 2000 MPa and a plastic deformation of 15%.
Hard particles with a uniform size distribution benefit the formation of AlN/CBC, resulting in a high strength of 100 MPa and thermal conductivity of 170 W/m K.
The ultrafine grained alloy exhibits large scale nonlinear deformation behavior with a recoverable strain of up to ∼3.4% in combination with a high strength of ∼1150 MPa, a low elastic modulus of ∼56 GPa and good ductility of ∼8%.
While the highest ultimate tensile strength for Ti-55511 and Ti-55521 are found to be 1298 and 1267 MPa for samples aged 8 h, the maximum ductility for Ti-55511 and Ti-55521 (14 and 15%) are achieved for 1 h aged samples, which still maintained a high strength of 1200 and 1145 MPa, respectively.
The V-added steel demonstrated a higher strength of fresh bainite (about 50 MPa) compared to the reference alloy.
A higher strength of the cement with the intergrinding MCFBCAs is attained, which is comparable to that of the pure cement paste (C O) at 28 days.
Replacement of cement with PFA (pulverised fuel ash) can achieve considerable savings; additionally, using a concrete of lower workability, employing a superplasticiser, using crushed rather than rounded aggregate and using a higher strength of cement can have comparably significant effects.
A higher strength of each individual tree also improves the accuracy of the final model—"The strength of each individual tree in the forest.
A more serious injury, in addition to necessitating a thorough medical evaluation at an appropriate facility, is better handled with more frequent doses of a higher strength of Arnica, like a 30x or 30c.
