The phrase "a high length" is not commonly used in written English and may sound awkward.
It could be used in contexts where you are describing something that has a significant or considerable length, but it is not a standard expression.
Example: "The bridge has a high length, making it one of the longest in the region."
Alternatives: "a considerable length" or "a significant length".
This creates a needle-like scratch with a high length to diameter ratio.
The actuator is built using a micromechanical bulk silicon process yielding structures with a low rotational spring constant due to beams with a high length to width ratio.
The fabricated hybrid fiber supercapacitor delivers a high length capacitance (1.41 F m−1), energy density (270 × 10−8 Wh cm−1) and excellent cycling stability.
The results indicate that grain boundary engineering may lead to an optimum ultrafine grained structure, i.e. with a high length fraction of Σ3 and Σ9 grain boundaries of approximately 40%.
The first process involves the optimization of the electro discharge machining (EDM) method to produce a set of microchannels with a high length to diameter ratio of 100, with a standard deviation from the average diameter below 0.2%, and with a surface roughness not higher than 2.0 μm.
A network of rivers of the Padma, the Jamuna, the Teesta, the Brahmaputra, the Surma, the Meghna and their tributaries covering the country with a high length of about 24,140 km (BBS 2011).
In order to machine boreholes having a high length-to-diameter ratio, deep hole drilling methods are applied.
Deep hole drilling methods are used for producing holes with a high length-to-diameter ratio, good surface finish and straightness.
This reactor has a high length-diameter ratio and can be considered as a representative tube of a multitubular reactor with gas solid suspension circulating inside the tubes.
The traditional tubular uses a high length-to-diameter ratio that requires manual cake removal; whereas the more modern tubular, which takes advantage of the solid-basket centrifuge design and has length-to-diameter ratio of order unity, is designed with automatic cake discharge and more space for solid storage; consequently it can take on feed with higher-solids concentration.
However, the term filopodia was initially introduced to define various surface protrusions sharing only one feature, a high length-to-width ratio, independent on their internal organization.
