The phrase "a height equivalent to" is correct and usable in written English.
It can be used when comparing heights or measurements, indicating that one height matches or corresponds to another.
Example: "The mountain reaches a height equivalent to that of the tallest building in the city."
Alternatives: "a height comparable to" or "a height similar to".
"I've seen plenty of tall guys where the ball is coming out at a height equivalent to their shoulder," Brees said.
Operating conditions were stable and a height equivalent to a theoretical plate of 13 mm was observed.
Subjects were required to perform a two-legged forward, diagonal, and lateral jump to a height equivalent to 50% of their maximum vertical leap, land on a single leg and balance for three seconds.
It was further determined that the packing utilised within the column had a Height Equivalent to a Theoretical Plate (HETP) of approximately 0.34 m when no dissolved salts were present corresponding to an estimated packing height of approximately 1.7 m.
In this work, laser doppler velocimetry (LDV) is used to show that for stirred tanks agitated with axial impellers the active volume of mean circulation for a stirred tank is not the whole tank, but a height equivalent to 23 of the tank diameter (T).
Human figures drawn on the walls of the pyramids by Egyptian artists were depicted with heights six times longer than the length of their feet; however, when the artists noticed that the proportions did not reflect reality, they adjusted the height of taller human figures to a height equivalent to seven feet.
Furthermore, an average height equivalent to a theoretical plate of about 40 cm was estimated, for the stated packing and operating conditions.
An Hmin of 9.57 at a μsf of 0.80 mm/s (corresponding to 0.8 mL/min) was obtained through van Deemter analysis, based on toluene, for the Crab-like column with the 1,2-diphenyl-1,2-ethylene-diamine 1,2-diphenyl-1,2-ethylene-diamine 1,2-diphenyl-1,2-ethylene-diamine 1,2-diphenyl-1,2-ethylene-diamine 1,2-diphenyl-1,2-ethylene-diamine
Specifically, we transformed the area under the RAF into a rectangle with its height equivalent to the maximum response and an equivalent area.
A more appropriate parameter for measuring efficiency is the height equivalent to a theoretical plate (or plate height), HETP (or h), which is L/N, L being the length of the column.
For non-binding conditions, trends of the height equivalent to a theoretical plate (HETP) as a function of reduced velocity are consistent with perfusion.
