Exact(9)
Finally, the MSC-S was designed with a gap length of 18 mm.
The design and fabrication of an electromagnetic MEMS actuator capable of repeatedly switching over a gap length of 100 μm is presented.
As an original result, it was demonstrated that for a confinement with a gap length of 0.1 mm and heat flux of 40 kW/m2 the heat transfer coefficient (HTC) increased by 31% and 100% for the cases with the deposition of nanoparticles of 10 nm and 80 nm, respectively.
Whereas CE3-ABRE pairs exhibited a smooth distance distribution, with most pairs showing a gap length of 151 to 300 bp (Fig. 6a), ABRE-CE3 pairs showed a large peak at a gap length of 151 200 bp (Fig. 6b).
Brookhart et al. also defined a gap as 60 days, whereas we used a gap length of 90 days.
The alignment of amino acid sequences was conducted using CLUSTAL W [ 39] with a gap opening penalty of 10 and a gap length penalty of 0.1.
Similar(51)
The calculations for the case when an external load is applied across the shear layer have been carried out for Strouhal numbers from 0 to 10, Mach numbers from 0·001 to 0·5, and a gap length-to-diameter ratio of 0·5 to 2·0.
Gaps yield a negative contribution to the alignment score and are usually modeled by a gap-length l depending score function g (l).
We established a minimum length of 70 bases for a sequence to be considered for assembly, no gap penalty and a 0.70 gap length penalty, and a maximum mismatch in end bases of 0. No repeat handling was used.
LAGAN aligner algorithm was run using a max gap length of 5 bp, a conservation rate of 45 bp, conservation super rate of 65 bp and a score cutoff of 25 bp [44], [45].
Iliac crest autografts were simulated by wooden blocks (20 × 30 mm) cut to an appropriate gap length, with a 1 mm overhang to create a "pressfit" situation that reflects the method used in the clinical setting.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com