Sentence examples for a function of tip from inspiring English sources

The representative plastic strain εr, as defined in Dao et al. (Acta Mater 49 (2001 38999), was constructed as a function of tip geometry in the range of 50° and 80°.

With h = 1/30, D/L = 0.5, and r = 0.9. Figure 5 shows the vibration displacement which is a function of tip length for the AFM nanomachining with D/L = 0.5,r = 0.9, and kc = 0.4.

The change in r is a more effective way to control displacement than D/L or kc. Figure 5 Vibration displacement as a function of tip length for the AFM nanomachining.

The adhesive forces FLP and FSP are a function of tip radius r and AR,[ 15] while the compressive force Fcompr,LP mainly depends on the AR and the Young's Modulus E.[ 16] Note that no coupling between the pillars is assumed in this simple model.

Therefore, the absolute magnitude of the electrostatic force as a function of tip-sample distance at different voltages can be derived, and the corresponding curves are shown in Fig. 11.

Both bare capillary tubes and micropipettes previously coated with a silicone lacquer were found to reproducibly approach to the sample surface when measuring the interaction force as a function of tip-sample distance.

The AFM measures the force as a function of the tip displacement and not directly as a function of the surface tip distance.

The frequency results are presented graphically in three-dimensional plots as a function of the (tip mass)/(beam mass) ratio and the (radius of gyration of the tip mass)/(beam length) ratio.

This allows us to predict the variation of τ as a function of the tip penetration depth.

In fact, C p is a function of the tip speed ratio, scalar λ, which is defined as follows: λ = Ω R V, (3).

This is clearly reflected by the following important feature: the power transmitted as a function of the tip position is not symmetric.