Sentence examples for a final material of from inspiring English sources

This route leads to a final material of relative density close to 98±2%.

DP showed biocompatible and non-toxic behaviors in cultured cells, both of which are considered optimal properties for the design of a final material for biomedical applications.

In fact, the final material of copper displacement deposition on PS represents the layer of the Cu/PS nanocomposite covered with quasi-continuous copper film.

The starting molar ratios of ptbaH4/btbaH4 of 0.05, 0.47, and 1.69 afforded the molar linker ratios in the final materials of 0.15 3 A (pure DMF), 1 3 B (6.25 % v/v NMP in DMF), and 5.1 3 C (12.5 % v/v NMP in DMF).

The metastable phase may be an amorphous precipitate, a polymorph of the final material, a hydrated species, or some system-contaminated substance.

According to the final material composition of the aforementioned researches, their capacities were ranged from 500 to 2000 mAh/g.

MALDI analysis of the final material showed distribution of masses with the center mass corresponding to the dendrimer bearing 27 out of ∼33 possible PEG residues.

A focus is given on the influence of these nanostructures on the properties of the final material through a direct comparison of the composites obtained after water evaporation from these structured nanoparticles.

The two indexed peaks are used for approximation of the unit cell of Mo6S4I6; (B) The final material is composed of pure multiwall MoS2 nanotubes.

The resultant slurry was poured onto a Cu-foil, and doctor blade with thickness set to (0.15 ± 0.01 mm) was run at 1.2 speed unit of CV-400 Rotech Lab Coater to get a final active material loading of ~2 mg cm−2.

In this case, specific surface area, pore size and porous volume can be varied in the final material as a function of chain length and concentration of the surfactant.