Sentence examples for a feed speed from inspiring English sources

The optimum solution is: a wheel speed of 7′500 rpm, a feed speed of 60 mm/min, a vertical feed of 12.5 μm/pass, no ultrasonic assistance and grinding along the c-axis.

In this study, ultrasonic effects with respect to grinding parameters including depth of cut (ae), feed speed (vw), and cutting speed (vs) has been investigated.

The results can be used to regulate and optimize the machine's feed speed, maintaining a constant spindle motor speed during cutting.

The model shows the dependence of the material removal on the ratio of wheel rotational to feed speed for the PPP process, in a form of an asymptote that is scaled by the surface hardness of each material.

Chen et al. (2007) studied the use of laser vision sensing for adaptive welding of an aluminum alloy in which the wire feed speed and the welding current are adjusted automatically as per the groove conditions.

The feed speed was kept constant (70 g/min).

Five parameters: the wheel speed, the feed speed, the vertical feed, the ultrasonic assistance and the crystallographic direction were considered via a design of experiments (DoE) approach.

The grinding parameters (feed speed, cut depth, grinding speed) have great influence on the grinding force and surface roughness.

Experiments were performed under different cutting conditions of pulse on time, delay time, wire feed speed, and ignition current.

It was found that three main parameters have the largest influences on the tangential grinding forces: the wheel speed, the feed speed and the vertical feed.

The feed speed and stability will both be improved because the tool path discontinuities are the most important source of feed fluctuation.