The phrase "a distribution plate" is correct and usable in written English.
It can be used in contexts related to engineering, manufacturing, or culinary settings where a plate is used to distribute or serve items.
Example: "The chef placed the appetizers on a distribution plate to ensure even serving for the guests."
Alternatives: "a serving plate" or "a distribution dish."
Additionally, the research is devised to test the effects of adding a distribution plate along with the surface mounted rods.
To resolve this, a distribution plate was added to the beam with the surface mounted rod repair to decrease the concentration of stress in the 152 mm (6 in). of the bulb resting on the support.
Finally it was found that the use of a distribution plate along with the surface mounted rods provides the greatest potential for strength recovery, or in the best case scenario, strength gain.
One of the two tests with a distribution plate showed an increase in shear strength of 43 % (end B) and the other test (end A) did not show an increase; however, that end after two different failure runs was noticeably deteriorated to the point of almost being unusable.
The main parts of the fluidized bed used in this work are a conical base (top diameter: 135 mm, bottom diameter: 77.5 mm), an air distribution plate, a draft tube (height: 153.5 mm, inner diameter: 33 mm, gap from the bottom: 7.0 mm), a cylindrical glass vessel (inner diameter: 140 mm) and a double-fluid nozzle with external mixing (orifice diameter: 0.7 mm).
Fluidized bed combustor, which consists of a reaction chamber, an air distribution plate, uses inert particles, as its bed material.
The initial bubble-PCWS was put into a container with an air distribution plate.
A flow distribution plate design was found effective to optimize the flow pattern in the core region.
A distribution orifice plate with seven distribution orifices was introduced at the outlet of ejector to improve the flow organization.
The height d (distance between the lower blades and air distribution plate) at which the agitation paddle was located had a considerable effect on the stability of the bed density at 9.36 cm/s < U < 10.70 cm/s.
Micro-electronic mechanical-system (Micro-electronic mechanical-systemcate both flow field plate and fuel distribution plate on the silicon wafer.
