The phrase "a discharge rate" is correct and usable in written English.
It can be used in contexts related to the measurement of the flow or release of a substance, such as in engineering, environmental science, or medical fields.
Example: "The battery's discharge rate determines how quickly it can provide power to the device."
Alternatives: "a release rate" or "an outflow rate."
The experimental capacity was 7.70 mAh (15% of theoretical) for a discharge rate of C/5.
With this novel grid, the negative active material (NAM) can deliver a specific capacity of 170 mAh g−1 at a discharge rate of 0.1 C.
Charge/discharge experiments indicated reversible capacity of 115 mAHr/g at a discharge rate of C/6 for 0.5 M Li in MMOITFSI.
The as-synthesized LiFePO4 shows an orthorhombic olivine with a discharge capacity of 158 mAh g−1 at a discharge rate of 0.1C.
Discharge rate investigations on full cells consisting of lithium metal ∣ MEEP gel polymer ∣ LiFePO4 delivered high capacities of 140 mAh g−1 at a discharge rate of 5C.
The test results show that the standard-response LO sprinklers at a discharge rate of 141 L/min per sprinkler did not control the test fire under a 12 m high ceiling and sprinkler skipping occurred.
In addition, for a discharging rate of 3 C and a charging rate of 1 C at 50 °C, the discharge capacity was 1533 mAh g−1 in the second cycle, and slightly dropped to 1469 mAh g−1 after 20 cycles, leading to high-energy densities of 2578 2782 Wh kg−1 (Fig. 5f and Supplementary Fig. 18).
When cycled for a discharging rate of 5 C and a charging rate of 1 C at 60 °C, the discharge capacity was 1472 mAh g−1 in the second cycle, and the reversible capacity of 1017 mAh g−1 with the coulombic efficiency of ~100% was retained after 100 cycles (Fig. 6a and Supplementary Fig. 19).
In this paper, we propose a discharge-rate-dependent battery prognostic method that is able to track usable battery capacity affected by DDRs in the process of battery degradation and to predict RUL at DDRs.
An experiment was designed to collect accelerated battery life testing data at DDRs, which are used to investigate how DDRs influence usable battery capacity, to design a discharge-rate-dependent state space model and to validate the effectiveness of the proposed battery prognostic method.
In our review of patients referred to an interdisciplinary clinic with DM2, we found a low discharge rate but a much higher than anticipated proportion of patients who defaulted from clinic.
