Sentence examples for a diffusion treatment from inspiring English sources

The coating was prepared by electroplating a thin layer of Pt on the superalloy followed by a diffusion treatment.

Coatings of ferromagnetic Cr-doped AlN are applied on a paramagnetic metallic substrate (Ni-base alloy) using a diffusion treatment.

Simple Pt-enriched γ + γ′ coatings were synthesized on René 142 and René N5 Ni-based superalloys by electroplating a thin layer of Pt followed by a diffusion treatment at 1150 1175 °C.

"Simple" Pt-enriched γ + γ′ coatings (16 19 at.% Al) were fabricated on René 142 and single-crystal N5 Ni-based superalloys by electroplating a thin layer of Pt followed by a diffusion treatment in vacuum at 1175 °C.

In this study, highly oxidation resistant MCrAlY bond coats were prepared by a cost-effective approach involving air plasma spraying (APS) followed by a controlled atmosphere heat treatment (a diffusion treatment performed in a furnace filled with Ar).

A later study, Haider et al., tested different designs of crosslinked GUR 1020 after a diffusion treatment with vitamin E. Wear rates of 2.70 mg/million cycles, 5.98 mg/million cycles, and 3.06 mg/million cycles are reported for a large size of a PS and CR design and a small size of the same CR design [ 18].

The hydrides precipitated in commercially pure titanium, produced by cathodic hydrogenation followed by a thermal diffusion treatment, have been characterized using optical and electron microscopy.

A subsequent short diffusion treatment eliminates the interfaces between the adjacent layers, yet maintains an overall carbon composition gradient across the thickness of the coating.

The entire surface modification process includes dipping carbon steel specimens into a molten Al pool to form an Al coat, subsequent diffusion treatment at elevated temperature to form an aluminized layer, sandblasting to generate dislocation network or cells, and recovery treatment to turn the dislocation cells into nano-sized grains.

Case hardening during diffusion treatment offers a mechanical support to the coating, which exhibits a lower coefficient of friction than the diffusion-treated surface.

This diffusion treatment introduces a supersaturated carbon solid solution, termed S-phase, which hardens the CoCrMo without detriment to the corrosion resistance.