The majority of the as-milled SmCo5 samples had the shape of flakes with a high degree of texture.
The results show a higher degree of texture of edge filaments and those closer to circumference, while the Bi-2223-phase Bi-2223-phase Bi-2223-phasehe tape content
For both materials, circumferential cracks resulted into higher fracture resistance than longitudinal cracks, indicating a certain degree of texture anisotropy introduced by the tube fabrication process.
The results reveal that high-quality LZO layers can be produced using completely water-based solutions, rendering a high degree of texture (full width at half maximum = 6.5°).
In contrast to the behavior of sputter-deposited elemental metals and disordered alloys, the films deposited at the two higher temperatures consisted of refined microstructures and exhibited a low degree of texturing.
A previous study has shown that irregularity associated with degree of texture coarseness (combination of transform and statistical approaches) is associated with lung tumour stage (rs = 0.71, P = 0.001; kappa = 0.7, sensitivity = 100%, specificity = 87.5%, P = 0.0001) and glucose uptake measure (obtained from FDG-PET, rs = 0.51, P = 0.03).
Cu powder (Alfa Aesar, <5 μm, 99.9% purity) pressed into a thick granular film onto a sapphire wafer was used as the model system since the high degree of texture in cold rolled Cu foils prevented reliable measurement of the powder diffraction geometry.
The degree of texture is quantified by Lotgering orientation factor (LOF), an index of a specific preferred orientation like {00 l} expressed as LOF = (p − p0)/(1 − p0), where p = Σ 00 l film/Σ hkl)film and p0 = Σ 00 l)powder/Σ 00l)powder[17].
The degree of texture increased with the Fe content in the presence of liquid phase.
Additionally, the peak fracture toughness of each orientation increased with the degree of texture.
For example, it was shown that the decrease of thickness, grain size and degree of texture is the best way to decrease time constants of metal oxide sensors.
