Sentence examples for a decrease in friction from inspiring English sources

For aluminides, a decrease in friction coefficient with the decrease in Al-content was noticed.

Experimental results showed that SiO2 nanofluids cause a decrease in friction coefficient and increase in surface quality of workpiece during machining process.

The conditions for a decrease in friction during ceramic brick production between a mixture and an extruder die under the influence of 20 30 kHz ultrasound applied to the die are calculated.

The positive effect of the rings MPT strengthening on the wear resistance of untreated inserts (Figs. 5b and 6b) could be explained by a decrease in the friction coefficient in the specimen counter body friction pair.

In addition, increasing from 0 to 15 degrees results in a decrease in the friction factor up to a certain value, after which the friction value approaches a constant value depending on Re value and (ℓw/ℓpl).

Furthermore, films deposited at − 200 V, − 300 V, and − 400 V showed a decrease in their friction coefficients under high vacuum conditions when compared to their friction coefficients at atmospheric ambient conditions.

A higher content of h-BN added to PEEK coating resulted in a decrease in the friction coefficient.

Ion implantation of high doses of nitrogen and carbon brought about a decrease in the friction and wear coefficients.

Also with an increase in the mass flow rate, there is a decrease in the friction factor from 0.0119 to 0.00802.

However, the friction curves obtained under dry conditions at 500°C (cf. Figure 1) show a different shape than all other curves, being characterised by a decrease in the friction coefficient at displacements above 18 mm.

Then, at a pulse voltage of − 5 kV fabricating hard Si-DLC films, an increase in TMS flow ratio leads to an increase in the silicon content in the films, resulting in a decrease in the friction coefficient.