Sentence examples for a current efficiency of from inspiring English sources

The anodic dissolution of Sn metal proceeded by a two-electron transfer reaction with a current efficiency of nearly 100%.

The Ti Al alloys containing about 15 27 at% Ti were produced with a current efficiency of about 25 38%.

For treating 500 mg/L phenol wastewater, the effluent COD of the single-cell reactor was 534 mg/L, with a current efficiency of only 19.9%.

Bismuth deposition was determined to be quasi-reversible on Au, with a current efficiency of 100%, based on integration of deposition and stripping voltammetric waves.

Rapid electrolysis of GeO2 to pure Ge has been realized at a cell voltage of 2.5 V with a current efficiency of about 92%.

A current efficiency of 3.01 cd/A and an external quantum efficiency of 2.37% at 20 mA/cm2 were obtained from this device.

The electrolyser results show, at 0.200 A and 1.88 V, that the electrolysis of water produces 0.082 Nl h−1 of hydrogen and a current efficiency (ηI) of 90.58%.

Device A exhibits a maximum current efficiency of 16.4 cd/A and power efficiency of 8.3 lm/W at about 1,000 cd/m2, which are higher than those of the reference device by 53.3% and 50.9%, respectively.

A proton exchange membrane (PEM) water electrolyzer with an anode made of this PbO2 nanowire, a cathode made of carbon supported platinum, and Nafion®-117 membrane operating at a current density of 1.5 A cm−2, an ozone current efficiency of 20% was achieved, and did not attenuate significantly during a 30-day period.

Consequently, the device with co-depositing mCdP and CuI as an emitter gave a maximum current efficiency of 37.3 cd A−1, a maximum power efficiency of 26.3 lm W−1.

In particular, the device with AnTPy as an ETL showed a maximum current efficiency of 14.4 cd A−1, a maximum power efficiency of 12.1 lm W−1, a maximum external quantum efficiency (EQE) of 8.15% and low efficiency roll-off even at an illumination-relevant luminance of 10,000 cd m−2.