Sentence examples for a core power of from inspiring English sources

Full core neutronic analysis showed a small hexagonal reactor, LBE-cooled, trans-uranics (TRU -67Zr fuel wiTRU -67Zrladding and structures, with a core power ofuel0 Mwithproduced a fast flux (>0.1 MeV) of 1.4 × 1015 n/cm2 s averaged over the whole length of six irradiation cladding with andotal testructuresme of more than 77 l.

The decoder was successfully tested at the maximum data rate of 10 Mbit/s, with a core power consumption of 6.78 mW at 3.3 V, which corresponds to an energy per decoded bit of 0.677 nJ.

The reference design uses a wire-wrapped, hexagonal lattice core, and is able to achieve a core power density of 130 kW/l with a core pressure drop of 700 kPa and a maximum cladding temperature under 650 °C.

The Ordinary Kriging (OK) method is presented that is designed for a core power mapping calculation of pressurized water reactors (PWRs).

Currently the ICEM document provides a core power supply model in terms of an IBIS-like syntax.

The adequate core power of 25% with 28% flow rate and a feedwater temperature of 280 °C are determined during pressurization phase.

So the court wants to ensure that Germany does not surrender to the EU any of the core powers of a democratic state.

The process, Dr. Gill said, "speaks to one of the core powers of the Internet -- this process of sharing".

The OLC opinion, like Wright and, even more conspicuously, Wright 's D.C. Circuit progeny, seeks a constitutional reading that most pragmatically facilitates the system of checks and balances by respecting the core powers of each political branch.

A diverse protection system, which is an independent and diverse reactor shutdown system that is initiated by the signals of a high core power or a high pressurizer pressure, is adopted in the advanced integral reactor.

Sodium cooled fast reactor (SFR) exhibit some unique thermo-hydraulic characteristics in comparison to thermal reactors, considering that SFR have a higher core power density, special configuration of assemblies, wire-wrapped spacers, special thermo-physical properties of sodium and so on.